Product ID:ENAMEL 16376 LIGHT GRAY ALKYD GLOSS
MSDS Date:01/11/1988
FSC:8010
NIIN:00-298-2298
MSDS Number: BHQST

CON-LUX COATINGS INC

226 TALMADGE RD
EDISON, NJ 08818-0847
US

Emergency Phone: 908-287-4000

Info Phone: 908-287-4000 / FAX 908-287-9288

Cage: 60189

CON-LUX COATINGS INC

847 EDISON, NJ 08818-0847 US

Telephone: 732-287-4000

Cage: 60189

MINERAL SPIRITS

CAS: 64742-47-8

Fraction By Weight: >1%

OSHA PEL 100 PPM

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: >1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:IRRITATION TO SKIN & EYES.IRRITATION TO
RESPIRATORY TRACT CAUSING HEADACHE, NAUSEA & DIZZINESS.

First Aid:INHALATION:REMOVE TO FRESH AIR.RESTORE RESPIRATION IF
NECESSARY.EYE:FLUSH IMMEDIATELY W/COPIOUS ATYS OF WTR FOR 15
MINS.CONSULT A PHYSICIAN.SKIN:WASH AFFECTED AREAS W/SOAP &
WATER.REMOVE CONTAMINATED CLOTHING.INGESTION:DRINK 1 OR 2
GLASSESOF WATER TO DILUTE.DO NOT INDUCE VOMITING.IF SPONTANEOUS
VOMITING OCCURS KEEP HEAD AT OR BELOW KNEE LEVELTO PREVENT
ASPIRATION INTO LUNGS.CONSULT PHYSICIAN IMMD

Flash Point Method:TCC
Flash Point:105F 40.56C
Lower Limits:1.0
Extinguishing Media:FOAM, CARBON DIOXIDE CO2, DRY CHEMICAL, WATER MIST.
Fire Fighting Procedures:SMOTHER FLAMES W/ONE OF THE ABOVE
EXTINGUISHING MEDIA.WATER MAY BE USED TO COOL DOWN UNOPENED
CONTAINERS IN VICINITY.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT.DO NOT USE IN
AREAS WHERE SPARKS OR OPEN FLAMES ARE PRESENT.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES.WEAR
APPROPRIATE PERSONAL PROTECTION EQUIP & APPROVED RESPIRATOR.
CONTAIN SPILL W/ABSORBENT MATERIAL & PUT INTO VAPOR TIGHT
CONTAINERS.PREVENT MATERIAL FROM CONTACTIN G ANY WTR SOURCES OR
SEWERS LEADING TO SURFACE WTR

Handling and Storage Precautions:STORE IN AREAS DESIGNED TO COMPLY
W/ANSI/NFPA 30 FLAMMABLE & COMBUSTIBLE LIQUIDS CODE.
Other Precautions:GROUND CONTAINERS WHEN POURING LIQS/PDRS TO AVOID
STATIC CHARGE BUILD UP.DO NOT HANDLE UNTIL MANUFACTURERS SAFETY
PRECAUTIONS HAVE BEEN READ & UNDERSTOOD.PROVIDE ADEQUATE
VENTILATION OR RESPIRATORY PR OTECTION TO REMOVE DECOMPOSITION
PROD.

Respiratory Protection:IN OUTDOOR OR OPEN AREAS,USE APPROVED
RESPIRATOR.IN RESTRICTED VENTILATION AREASUSE APPROVED RESPIRATOR
TO REMOVE A COMBINATION OF PARTICLES & VAPOR.
Ventilation:YES
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY EYE WEAR TO PROTECT FROM SPLASH
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT
W/CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
WASHROOM FACILITIES.
Supplemental Safety and Health
NK

HCC:F4
Boiling Pt:B.P. Text:148 - 323F
Vapor Density:>AIR
Evaporation Rate & Reference:Percent Volatiles by Volume:59.77

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT, SPARKS OR OPEN FLAMES.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.